 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CPC1035N 4 Pin SOP OptoMOS(R) Relay Load Voltage Load Current Max RON CPC1035N 350 100 35 Units V mA Features * Small 4 Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500VRMS Input/Output Isolation * FCC Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Description The CPC1035N is a miniature 1-Form-A solid state relay in a 4 pin SOP package that employs optically coupled MOSFET technology to provide 1500V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically coupled input is controlled by a highly efficient GaAlAs infrared LED. The CPC1035N uses Clare's state of the art double molded vertical construction packaging to produce the world's smallest relay. The CPC1035N offers board space savings of at least 20% over the competitor's larger 4 pin SOP relay. Approvals * UL/C-UL Recognized Component File #: E76270 * BSI CERTIFIED - CERTIFICATE #: 8416 (EN60950) Ordering Information Part # Description CPC1035N 4 Pin SOP (100/tube) CPC1035NTR 4 Pin SOP (2,000/reel) * For other packaging options consult factory. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Pin Configuration CPC1035N Pinout + Control Control 1 2 4 3 Load Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-CPC1035N-R5 www.clare.com 1 CPC1035N Absolute Maximum Ratings (@ 25 C) Parameter Input Power Disipation Input control Current Peak (10ms) Reverse Input Voltage Total PowerDissipation Capacitance Input to Output Isolation voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 seconds Max.) 1 2 Min 1500 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 4002 mW 1 pF Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. VRMS +85 C +125 C +220 C Derate Linearly 1.33 mw / oC Derate Linearly 6.67 mw / oC Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC Peak1 Peak Load Current On-Resistance2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current3 Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current 1 2 3 Conditions 10ms IL=100mA VL=350V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=100mA IF=5mA VR=5V Symbol VL IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR Min 2 0.3 0.9 - Typ 30 25 0.9 1.2 - Max 350 100 350 35 1 2 1.0 50 1.4 5 10 Units V mA mA mA ms ms pF mA mA V V A Load current derates linearly from 100mA @ 25oC to 70mA @85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended. 2 www.clare.com Rev. 5 CPC1035N PERFORMANCE DATA* 35 30 CPC1035N Typical LED Forward Voltage Drop (Ambient Temperature = 25oC) IF = 5mADC CPC1035N Typical On-Resistance Distribution (Ambient Temperature = 25oC) (Load Current = 100mA) 35 30 Device Count (N) CPC1035N Typical Blocking Voltage Distribution (Ambient Temperature = 25oC) 35 30 25 20 15 10 5 0 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (V) Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Device Count (N) 25 20 15 10 5 0 26 27 28 29 30 31 32 On-Resistance () CPC1035N Typical IF for Switch Operation (Ambient Temperature = 25oC) (Load Current = 100mA) 25 20 15 10 5 0 0.55 0.60 0.65 0.70 0.75 0.80 0.85 LED Current (mA) CPC1035N Typical IF for Switch Dropout o (Ambient Temperature = 25 C) (Load Current = 100mA) 25 20 15 10 5 0 0.55 0.60 0.65 0.70 0.75 0.80 0.85 LED Current (mA) 25 20 15 10 5 0 CPC1035N Typical Turn-On Time (Ambient Temperature = 25oC) (Load Current = 100mA; IF = 5mA) Device Count (N) Device Count (N) Device Count (N) 0.50 0.60 0.70 0.80 0.90 1.00 1.10 Turn-On (ms) 25 20 15 10 5 0 CPC1035N Typical Turn-Off Time (Ambient Temperature = 25oC) (Load Current = 100mA; IF = 5mA) CPC1035N Typical Load Current vs. Temperature 180 160 Load Current (mA) 140 120 100 80 60 40 20 0 Leakage (A) 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 CPC1035N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated Device Count (N) IF =10mA IF =5mA 0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Temperature ( oC) Temperature (oC) 0.21 0.22 0.23 0.24 0.25 0.26 0.27 Turn-Off (ms) CPC1035N Typical Blocking Voltage vs. Temperature 430 Blocking Voltage (VRMS) 425 Turn-On (ms) 420 415 410 405 400 395 -40 -20 0 20 40 o CPC1035N Typical Turn-On vs. Temperature (Load Current = 50mA) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 Temperature (oC) 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 -40 CPC1035N Typical Turn-Off vs. Temperature (Load Current = 50mA) 5mA 10mA Turn-Off (ms) 10mA 5mA -20 0 20 40 60 80 100 Temperature ( oC) 60 80 100 80 100 Temperature ( C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 5 www.clare.com 3 CPC1035N PERFORMANCE DATA* CPC1035N Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 (oC) 80 100 120 Temperature CPC1035N Typical Turn-On vs. LED Forward Current (Load Current = 100mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) CPC1035N Typical Turn-Off vs. LED Forward Current (Load Current = 100mA) 0.7 0.6 Turn-Off (ms) 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA 60 50 On-Resistance ( ) CPC1035N Typical On-Resistance vs. Temperature (Load Current = 50mA; IF = 10mA) 3.000 LED Current (mA) 2.500 2.000 1.500 1.000 0.500 -40 -20 0 20 40 60 (oC) 80 100 0 -40 CPC1035N Typical IF for Switch Operation vs. Temperature (Load Current = 50mA) CPC1035N Typical IF for Switch Dropout vs. Temperature (Load Current = 50mA) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 40 30 20 10 0 Temperature -20 0 20 40 o 60 80 100 Temperature ( C) Temperature (oC) 150 Load Current (mA) 100 50 0 -50 -100 -150 CPC1035N Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) IF = 5mA CPC1035N Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time Load Current (A) -3 -2 -1 0 1 2 3 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 5 CPC1035N Mechanical Dimensions 4 Pin SOIC Narrow ("N" Suffix) 6.09 .25 (.240 .010) .38 x 45 (.015 x 45 ) .38 TYP. (.015 TYP.) PC Board Pattern (Top View) 2.54 0.127 (0.100 0.005) 3.81 .13 (.150 .005) 1.01 .025 (.040 .001) 0.432 0.127 (.017 .005) .20 .025 (.008 .001) 2.18 MAX. (.086) 2.54 TYP. (.100 TYP.) 4.09 0.20 (0.161 0.008) 5.66 0.14 1.448 (0.057) (0.223 0.005) 0.889 (0.035) Dimensions mm (inches) Rev. 5 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-CPC1035N-R5 (c)Copyright 2000, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 1/12/01 |
Price & Availability of CPC1035
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |